Technical Requirements for MECHANICAL REVERSE PULLEY

PLEASE CONFIRM YOUR BIKE MEETS THE FOLLOWING REQUIREMENTS NECESSARY FOR INSTALLING THE MECHANICAL REVERSE PULLEY:

1. Is a 2009 and later touring bike
   
2. Has an available accessory switch (similar to the one shown below):
   
   
   
3. If your bike has a large-diameter aftermarket exhaust AND 13 inch shocks, you have at least 1" clearance on the right side of the axle.  Some large exhausts cause a clearance issue with the axle air fitting.  You will need one inch of clearance from the right side of the axle nut.  If this is a problem, you may be able to use a spacer for rear exhaust mounts or switch to a 12 or 11 inch shock.